Refuse collection trucks, garbage trucks, trash trucks, recycling trucks, front loader refuse trucks, side loader trucks, truck bodies, drop frame trucks, automatic side loader, manual side loader, residentual side loader, ranger, sierra, hard body, reclaimer, cangaroo, trinity,

*Standard Equipment*	*Optional Equipment*
*Chassis Specs*	*General Information*
*Performance*	*Material Specs*
*Truck Drawings*	*Home*

1-800-800-5485

STANDARD EQUIPMENT

INDUSTRY STANDARD CONTROLS
LARGE LEFT AND RIGHT SIDE STEPS
DUAL HAND GRIPS ON EACH SIDE
80 INCH HOPPER WIDTH
56 INCH HOPPER HIGHT
50 INCH TAILGATE SEAL HIGHT
LARGE 3 YARD HOPPER

RETURN TO TOP OF PAGE

HOME

1-800-800-5485

OPTIONAL EQUIPMENT

CART TIPPERS
REAR VISION CAMERA SYSTEM
WORK LIGHTS
STROBE LIGHT
KICK BAR
TOOL BOX
CABLE HOIST
AUTOMATIC GREASE SYSTEM
ACCESS DOOR WITH LOCKOUT
TWO TONE PAINT OR STRIPES

RETURN TO TOP OF PAGE

HOME

1-800-800-5485

GENERAL INFORMATION

*BODY SIDES* Body Sides Are Formed In An Arc To Aid In Refuse-Packing And Ejection. they are Manufactured From A Single Sheet Of 3/16" AR 235 Steel Plate.
	*BODY ROOF* The Body Roof Is Made From A Single Sheet Of 11 GA. High Tensile Steel. The Roof Is Also Bowed In An Arc To Aid In Packing And Ejection And To Furnish Additional Strength
*BODY FLOOR* The Body Floor Is Manufactured From A Single Flat Sheet of 3/16" AR 235 Steel Plate
	*BODY SIDE BOLSTERS* The Body Side-Bolsters Are Fabricated From A Formed 12" By 5" Channel Made Of 3/16" Thick AR 235 Steel Plate
*BODY LONGITUDINALS* The Body Longitudinals are made from A 8" x 2 1/2" x 1/4" Web A36 Steel Structural C Channel.
	*FLOOR SUPPORT MEMBERS* The Floor Support Members are made from A 6" x 7 1/2" x 3/16" Web A36 Steel Structural C Channel.
*FRONT HEADER* The Front Header is made from 10 Gage A36 Steel Plate
	*HOPPER FLOOR* The Hopper Floor is made from 1/4" AR 400 Steel Plate.
*HOPPER SIDES* The Hoper Sides are made from 3/16" AR 235 Steel-Plate.
	*PACKING PANEL* The Packing Panel is made from 1/4" AR 235 Steel-Plate.
*EJECTOR PANEL* The Ejector Panel is made from 10 Gauge AR 235 Steel Plate.
	*PACKER AND SLIDE CONTROLS* The Packer and Slide Controls are Mounted on the Curb-Side of the Tailgate Assembly and Conform to Industry Standards.
*TAILGATE AND EJECT CONTROLS* The Tailgate and Eject Controls are Mounted on the Street-Side of the Body and Conform to Industry Standards.
	*Cylinders* All cylinders use chrome-plated rods, AQ type piston seals.
*Sweep Cylinders* 4 1/2" x 3 1/2" x 36 1/2" cylinders with chrome-plated rods, AQ type piston seals.
	*Ejector Cylinder* 17 & 20 yd = 6 1/4 x 56" three stage cylinder with chrome-plated rods, AQ type piston seals. 25 yd = 7 1/4 x 56" four stage cylinder with chrome-plated rods, AQ type piston seals. 32 yd = 8 1/4 x 56" five stage cylinder with chrome-plated rods, AQ type piston seals.
*Tailgate Cylinders* 2 7/8" x 2 1/2" x 48" cylinders with chrome-plated rods, AQ type piston seals.
	*Slide Cylinders* 5" x 4" x 48" cylinders with chrome-plated rods, AQ type piston seals.

RETURN TO TOP OF PAGE

HOME

1-800-800-5485

RECOMENDED CHASSIS SPECIFICATIONS

BODY	AXLE	CAB TO AXLE	AFTER FRAME
17 CU YD	SINGLE	131 INCHES	35 INCHES
20 CU YD	SINGLE	150 INCHES	35 INCHES
17 CU YD	TANDEM	114 INCHES	55 INCHES
20 CU YD	TANDEM	132 INCHES	55 INCHES
25 CU YD	TANDEM	163 INCHES	55 INCHES
32 CU YD	TANDEM	206 INCHES	55 INCHES